UPVC Window Repairs
Your windows play an important part in the appearance and energy efficiency of your home. However, they could be damaged or even broken.
Window repairs are usually less expensive than replacing the entire window. Broken handles, damaged hinges or mechanisms and broken locks can be fixed without the necessity of replacing your windows.
1. Broken Glass
If your windows are damaged, it can cause a draft or allow cold air to enter your home. In addition, the cracks can pose safety risks particularly when you have children. Fortunately, it's easy to repair broken glass windows.
Whether you're dealing with an injury from a storm or a window which was hit by a stray ball the most important thing is to repair it quickly before it gets any worse. If the crack is large enough to overshadow more than one glass pane, or if it's so wide that your hand is able to squeeze through the crack without putting yourself at risk of breaking or bending the window, you may need to replace the whole window.
To protect yourself from broken pieces, wear heavy gloves and safety goggles. Apply tape over any cracks or areas where it has shattered to keep the glass in place. After the tape is applied to the glass, gently tap it to loosen and remove any large pieces. Put the remaining glass into an appropriate container to dispose of it.
Next, lay the sash flat on the table and take off any bead strip around the frame to ensure you can work with the glass. Remove any sealant that is around the break using a utility knife or deglazing tool. Once the old glass has been removed, you must carefully clean the rabbet, removing any trace of sealant and prepare the new glass.
It's a great idea keep a piece of paper near the window to note the measurements needed to order replacement glass. This will prevent you from making a mistake when ordering glass replacement and ensure that it's the perfect fit.
When the glass is replaced it is essential to use a high-quality silicone sealant. This will prevent water from leaking into your home. Apply a sealant made of polyurethane on the sash edge to give an additional layer of waterproofing. It is also crucial to ensure that the glass is tempered rather than annealed. This will provide an additional layer of security.
2. Cracked frames
uPVC (un-plasticized Polyvinyl Chloride) is a highly sought-after option for double-glazed window frames because it is strong and easy to maintain. Windows made from this material may be damaged and require repair services.
Fracture cracks are an issue that is quite common. It can happen due to many reasons. Cracks can be caused by hitting the window with a heavy object such as a ladder or a garden tool. The frame may break or even come away from the wall. The cracks could also develop due to natural causes such as swelling and shrinking of the uPVC over time.
Leakage through the window is another issue. This could be caused by many things including the nail fins loosing or breaking completely, allowing air to enter the home. This is a serious issue which needs to be addressed immediately to prevent water from entering your home.
Additionally, if the hinges of a window are out of alignment or damaged, it could cause leaks and draughts. These hinges are responsible to squeeze the sash and window repair near seal to seal the window securely.
Another issue that is common is fogging on the glass. This is usually caused by the seal between the glass separating enough to let air in and produce condensation. This can be solved by resealing the window.
There are several ways to avoid these types of repairs, including doing regular maintenance and cleaning your windows regularly with soapy water. For the best results and a efficient repair, choose a professional company that specializes uPVC. They'll have the equipment and expertise to fix your windows quickly and efficiently.
It is recommended to be careful not to slam your windows against the wall because this could cause damage to the frames and also cause them to lose their insulation properties. It is also essential to keep them from direct heat sources, as this can cause the uPVC to warp and break.
3. Faulty Locks or Hinges
Over time, upvc window frames can become stiff and locks may not work properly. This can be a hassle and make your home feel less secure. There are many ways to address this issue without the need to purchase a new window unit. Window repairs can save you a lot of money compared to buying a new window. Cloudy2Clear's experts in upvc repair can fix your window handles or hinges so they can function again.
UPVC windows are a popular option for home improvement projects due to their durability and energy efficiency. But, as with everything in life, they can become less durable over time and require regular maintenance to ensure the best results. However, fixing your UPVC windows or doors is a simple task that can save money in the end.
Here are a couple of suggestions to solve your UPVC window that isn't closing:
- Check the seals and locking gearbox. If windows are still unable to lock, you might need to adjust the frame or sash. To accomplish this remove four screws that hold a metal strip on the frame of the window to the left. Each screw should be removed by a full turn. Be sure to not loosen the screws that secure the hinges. These are designed to allow the window to be closed and opened and shouldn't be tampered with.
Then, move the sash downwards or up until it is in the position you want. It is possible to use shims to achieve the perfect fit. Once you have found the right position, tighten all the screws and replace the plastic caps.
It is important to have a functional UPVC windows to ensure your safety and comfort. If you're experiencing a problem with your window, don't hesitate call the professionals at Window Geeks today. They provide free estimates, no call-out fees and a two-year guarantee on all work they do. For more information, visit their website or give them a phone call! They service Widnes Runcorn St Helens and Warrington.
4. Damaged Seals
uPVC windows are made to last. They are able to withstand tough weather conditions, but they do have imperfections. One of the most frequent problems that you may find with uPVC windows is condensation between the glass panes it could be a sign of a damaged window seal or it could be due to the high humidity in your home.
To avoid condensation from developing on your uPVC windows, first make sure that you're not using any colored cloths around them as this can cause dye staining or any cleaning products that contain harsh chemicals as this can also damage your uPVC window frame. Instead, you should use a white, soft cloth that's been soaked in water to clean your windows. If you're concerned about dirt or stains piling over your window frames then it's also worth buying solvent PVC cleaner which is available in most hardware stores It will clean your windows and will aid in preventing future damage.
Another common issue that you will encounter in uPVC window seals is that they could become damaged over time, which is why it's important to replace them whenever necessary. This can be done easily and does not require the assistance of a professional to finish. First, you'll have to remove the old seal from your window by grabbing it and pulling it off. If the seal is held on quite tightly then you can try to use a builder's knife to pray a portion of it away until it can be pulled away from the window frame.
Once you've removed the seal from your window then you can put it back in place and ensure that it's properly fitted into the grooves of the uPVC frame. Repeat this process for each side of the window until the seal has been fully inserted into the grooves. After you've completed this then you can look at the corners of the window for gaps, if there are any, then apply some more silicone sealant to fill the gaps and make sure that the window is completely sealed.